Project Examples

Example 2: B-Pillar Interior Panel

T/Mould project in serial production

Project "B-pillar interior panel" for a German medium-sized vehicle

TandemMould 2+2-cavities

Runner system:
   1x standard jet
    (positioned in the fixed side of the mould)
+ 2x standard jets
    (positioned in the middle plate of the mould,
    Incoe’s "T/Mould jet")

Cold runner distributor within the parting lines for injecting the 2 cavities of each parting line

Details about the b-pillar

Example 3: Vacuum Cleaner Bag

T/Mould project in serial production

Project "Vacuum cleaner bag"
Product for fixing and closing vacuum cleaner bags

TandemMould 3+3-cavities

Runner system:
snorkel for melt transmission into middle plate. Further on, hot runner manifold and 3 open jets per parting line

Details about the vacuum cleaner bag

Example 4: Bezel for Multibox

T/Mould project in serial production

Project "Bezel for Multibox", consisting of frame and cover product

TandemMould 1+1-cavities

Injection:
1x standard jet on plate with cold runner distributor within parting level 1,
and further on with cold runner rod on second distributor within parting level 2

Details about the bezel

Example 5: Twindrive-Care (TDC)

T/Mould project in serial production with gas injection

Project "Twindrive-Care" (TDC):
Body and cover products for drive system of a hospital and care bed

TandemMould 1+1-cavities

Runner system:
Gating beside the machine axis by needle valve jets directly on each part

Details about the TDC

Example 6: Mobile Phone Cover

T/Mould project as show mould

Project Mobile Phone Cover:
Upper and lower parts for mobile phone

TandemMould 2+2-cavities

Runner system:
Melt with snorkel into the middle plate.
Injection out of the middle plate with needle valve jet directly on each part

Details about the mobile phone cover

Example 7: Case

T/Mould project in serial production

Project portable "case" for power tools for DIY

TandemMould 1+1-cavities

Producer:
Kunststofftechnik Borgmann GmbH, Germany

Details about the T/Mould project "case"

Example 8: Underfloor box for Multibox

T/Mould project in serial production

Project "Underfloor box for Multibox" as downer part of the "Bezel for Multibox" (Example 4)

Injection:
In both parting lines with central hot runner. The melt flow for the second parting line goes through the cooling part in the first parting line.

Details about the "Underfloor box"